guide4 min read
cone fillers and rolling machines: how they work
cone makers, fillers and machines. which tool does which job.
three different tools get called a cone maker. one shapes your own paper into a cone, one fills cones that come pre-rolled, and one skips the cone and rolls a straight one for you.
- cone makers shape the paper. the RAW Cone Creator and the RAWL Pen.
- cone fillers fill pre-rolled cones. one to six at a time.
- rolling machines roll it straight. sized by paper length: 70mm, 110mm, 12 inch.
- always roll toward you. RAW's one rule for its machines.
the tools, side by side
| tool | what it does | you need | suits |
|---|---|---|---|
| by hand | fill a pre-rolled cone a little at a time. | a cone and a poker | one now and then. |
| Cone Creator | rolls a paper and tip into a cone round the tool. | a paper and a tip | picking your own paper. |
| RAWL Pen | a pen you roll a cone round, with ink for marking the tip. | a paper and a tip | keeping the kit small. |
| cone filler | fills one or more pre-rolled cones at once. | pre-rolled cones | doing a few in one go. |
| rolling machine | rolls paper and fill into a straight, even roll. | a paper the machine's length | the same roll every time. |
using the Cone Creator
- roll a tip and slip it into the hole at the end of the tool.
- wrap the paper round the tool, with its bottom edge lined up against the base of the tip.
- roll it tight, then lick and stick the gum line.
- hold the tip and pull the rope. the finished cone slides off, ready to fill.
those are RAW's own steps. the RAWL Pen works the same way without the rope: roll the paper round the barrel, seal it and slide it off.
cone fillers
a filler holds pre-rolled cones upright while you fill them. RAW makes a few. the Double Shot fills one or two cones and carries them. the Six Shooter fills one, two, three or six, then pushes them up like toast. the loaders fit king size or 1¼ and come with a wooden poker and a scraping card. we don't stock fillers yet. for one cone, a wooden poker does the job, and filling a cone by hand shows how.
using a rolling machine
- open it. lift the front roller up and toward you, then spread your blend evenly between the two.
- close it and turn once. push the rollers together and give the front one a full turn toward you.
- feed the paper in. gum side up and facing you, with about half an inch showing. wet the gum lightly.
- roll both rollers toward you until the paper's taken in. turn the back roller backwards to let it out.
a machine doesn't make a cone. two rollers give you a straight roll. if you want the cone shape, use a cone maker or buy them pre-rolled.
which machine
Supernatural
for RAW's foot long Supernatural papers, with brass rollers that don't flex. the RAW 12 inch.
match the machine to your paper's length. width matters less: a slim paper and a wide one both go through the same 110mm machine. which paper is which length is in rolling paper sizes.
the short of it
want cones in your own paper: a Cone Creator or a RAWL Pen. want a straight roll that comes out the same every time: a rolling machine sized to your papers, which for most people is 110mm. already buying pre-rolled cones: a poker, or a filler if you do a few at once.


































